Vibe FAQ

In the simplest sense, the cells in our body have an electrical charge. A voltage, if you will, and when that voltage gets too low, you get sick. This has been proven in many studies. In general, what PEMF does, is recharge your cell's batteries, so that your cells have more energy to help heal yourself.

The other thing that it does is it increases adenosine triphosphate, or ATP in the body. It's the main fuel that your cells use for food and it's been shown that PEMF can increase ATP up to 500%. So, it recharges your cells and gives them food so the body can heal itself.

The Vibe is a low-risk general wellness device. We do NOT treat, diagnose, prevent, or cure any disease nor do we make ANY claims in this manner.

Any current medications, therapies or treatments SHOULD NOT be discontinued during the use of the Vibe. Consult with your doctor before you make any changes.

The following general contraindications taken from Dr. Pawluk (William Pawluk, M.D. is the medical authority on PEMF) apply to the Vibe:

PEMF MACHINES RISK AND POTENTIAL DANGERS OF PEMF THERAPY: The only absolute contraindication for use of a PEMF device is placing an active applicator over implanted electrical devices like pacemakers, cochlear implants, intrathecal pumps, etc. because the magnetic field can shut the device off or otherwise interfere with its function.

PEMFs are contraindicated in organ transplant patients. This is because these people are on immune suppression medications to prevent organ rejection. We do not want to risk adversely affecting the immune suppression/rejection process. There is a chance that PEMFs may actually stimulate or activate a more aggressive rejection process by stimulating the immune system.

USING YOUR PEMF MACHINE SAFELY

Safety of PEMFs has not been established in pregnancy, although there is no evidence of harm. Most manufacturers warn against the use of their device during pregnancy.

PEMFs should be used with caution in Grave’s disease or in the case of active bleeding. Please exercise caution and your best judgement while using a PEMF device if impacted by these conditions.

Extremely high intensity PEMFs (> 5000 Gauss) should be used with caution or with professional guidance in people with implanted metals, such as joint replacements, dental implants, mechanical heart valves, metal stents, or metal staples in blood vessels. This is not due to risk of injury or harm, but because extremely high intensity PEMFs may stimulate the nerves in the area of the metal, causing sharp pain. High intensity PEMFs may also add to the shear stress of metal clips placed in or near the blood vessels.

The original frequencies came from a very simple list on an old machine that was discovered back in the early 1990's. Since then, 8000 practitioners over 35 years have experimented with those frequencies in a clinical environment.

It uses frequency pairs and those frequency pairs you can think of as ingredients and the protocols as recipes. So, where the protocols come from was trial and error from all those different doctors, chiropractors, physical therapists, etc., just experimenting with real patients trying to find the right combinations of frequencies that gave the best results.

Those are the protocols that are used in the Vibe.

It's resonating with the water in your body like a pebble in a pond. So the energy enters the body where the device is located, but it travels just like a wave on water. Again, think of it like a pebble on a pond. One reason we believe this is happening is it doesn't work as well if you are not hydrated - which is a good clue.
An alternating magnetic field will create an electrical current, albeit at a very small one. That electrical current is traveling through the body because the body's electrically conductive.

So it's those two principles that allow the energy to travel further than just the magnetic field itself.

There are a number of ways to know the Vibe is working.

The frequency bars on the screen show that the protocol is running. Please note that the screen will go into sleep mode after 15 minutes to save battery power but the protocol is still running.
A second way you know it's working is the device will get warm up to 105 degreesF so you will feel it.

You can also test it with the Magnetic Field Tester. Simply hold the bottom of the tester over the coils and you will see the magnet jump around and make noise.

The coils are at the bottom on the back behind the wavey holes. See video below:

https://youtu.be/VqARKuZv0aE

There are lots of PEMF devices out there. Most people who have heard of the technology will be familiar with a mat and there are several brands out there. One of them that’s the most common is the Bemer mat.

The VIBE is 25 times less expensive, 125 times smaller, 8 times stronger, and one piece not 7. The World’s only pocket PEMF therapy device.

PEMF mats were an awesome invention in their day. They have provided relief for millions of people around the world. But time moves on and so does technology.

PEMF mat technology is over 35 years old, and the modern replacement is called VIBE. It is a single stand-alone device that is ridiculously easy to use. You select one of the 59 protocols, click play, and put it in your pocket or wear it around your neck with lanyard. Or place it anywhere against your body.

It’s “therapy on-the-go”

Faster, Better, Cheaper.

Magnetic therapy has been around for millennia

Lodestones, or natural magnets, have been used for centuries in many different cultures for a variety of purposes. The earliest known use of lodestones was in China around the 4th century BC. These naturally occurring magnets were used to create magnetic compasses that were used for navigation.

Over the next few centuries, lodestones were used by the Greeks, Romans, and Arabs. The Greek philosopher Plato even wrote about the healing powers of lodestones in his dialogue Timaeus. In the 1st century AD, Pliny the Elder wrote about how magnet therapy was used to treat headaches and gout.

More recent history

PEMF therapy has a long and rich history, dating back to the early 1900s. In the early days, PEMF therapy was used primarily for treating pain and injuries. However, it wasn’t until the 1950s that PEMF therapy began to be used for more serious medical conditions.

One of the earliest pioneers in PEMF therapy was Dr. Robert O. Becker. A renowned surgeon and researcher, Dr. Becker was one of the first to discover the healing potential of electrical stimulation. In his groundbreaking book “The Body Electric”, Dr. Becker detailed how he used electrical stimulation to successfully treat a wide variety of injuries and illnesses.

While electrical stimulation had been used for centuries to treat pain, it wasn’t until the work of Dr. Becker that its true healing potential was realized. His work laid the foundation for the development of modern PEMF therapy devices.

Since the early days of PEMF therapy, there have been many advances in technology and numerous clinical studies conducted on its efficacy. Today, PEMF therapy is commonly used to treat a wide range of conditions, including pain, inflammation, arthritis, osteoporosis, and even depression and anxiety.

The hearth’s heartbeat

PEMF is all around us and you are engulfed in it. If PEMF was harmful, we would all be dead.

The Schumann resonances are a set of global electromagnetic resonances, named after physicist Winfried Otto Schumann who predicted their existence in 1952. They are caused by lightning strikes in the atmosphere and were first observed experimentally in 1954.

The Schumann resonances occur because the space between the Earth’s surface and the ionosphere acts as a waveguide. The base frequency of the resonance is determined by the circumference of the Earth, and subsequent harmonics are spaced at integer multiples of this frequency. The resonant frequencies depend on the size and shape of the Earth, but are typically around 7.83 Hz, 14.3 Hz, and 20.8 Hz

The amplitudes of the Schumann resonances change depending on solar activity and other factors, but they are generally very stable over long periods of time. Because of this stability, they can be used to monitor changes in the Earth’s environment, such as volcanic eruptions or nuclear tests.

NIH Studies

Go to PubMed and search on “PEMF” you will find over 800 published studies

https://pubmed.ncbi.nlm.nih.gov/?term=pemf+

NASA and PEMF

Just Google “NASA PEMF Study” as see all of the research done there

The majority of the VIBE protocols use a series of frequency pairs. If you think of the frequency pairs as cords on a guitar, then the protocols would be a song that has 20 to 50 different chords and each protocol is completely different.

So the vibe does not use in most cases a simple frequency or frequency sweep. It uses proprietary copyrighted protocols that range from 30 minutes to 2 1/2 hours. All of the frequencies are super low energy between 1 and 1000 Hertz

Forget the Mat. The VIBE is 25 times less expensive, 125 times smaller, 8 times stronger, and one piece not 7. The World’s only pocket PEMF therapy device.

PEMF mats were an awesome invention in their day. They have provided relief for millions of people around the world. But time moves on and so does technology.

PEMF mat technology is over 35 years old, and the modern replacement is called VIBE. It is a single stand-alone device that is ridiculously easy to use. You select one of the 59 protocols, click play, and put it in your pocket or wear it around your neck with lanyard. Or place it anywhere against your body.

It’s “therapy on-the-go”

Faster, Better, Cheaper.

The average length of a protocol is about 40 minutes with the shortest being 30 minutes and the longest a little over 2 1/2 hours. Each protocol is completely different.

When you’re running the protocol, you must complete the entire protocol to get the maximum effect because it’s not operating on a single frequency. You must go through the entire protocol or recipe to get the benefit. You can pause the protocol at anytime and restart it later, but you must complete the entire protocol.

For example, sleep is 46 minutes long. If you only run it for 10 minutes it’s not really going to help you. You need to run it an hour before bedtime as a specific example.

So the vibe does not use, in most cases a simple frequency or frequency sweep. It uses proprietary copyrighted protocols that range from 30 minutes to 2 1/2 hours. All of the frequencies are super low energy between 1 and 1000 Hertz.

No the VIBE cannot treat or cure cancer. The VIBE operates at an extremely low energy range, 1 to 1000 Hertz and you need much higher energy to kill a cancer cell. We recommend a Rife machine specifically Spooky 2 is one of the most affordable and most popular ones out there.

However, if you or a loved one has experienced cancer, the VIBE can provide all kinds of relief for post-radiation inflammation and pain, depression, anxiety, sleep, and many other “side effects” that come from the evil of cancer.

No it cannot help with parasites, similar to why it can not help with cancer. The energy is not high enough to kill parasites, however the immune support protocol may help to fight it off. Reach out to us to find out more about help for parasites. There is a device called the Firefly, that is an advanced form of photobiomodulation, or light-based therapy. Using a unique combination of blue, red, and near-infrared light, it delivers a remarkably powerful yet gentle stimulation to the body’s cells and circulation — encouraging natural repair and improved function.

The number one reason the VIBE won’t work for you is that you don’t use it.

You need to use it a minimum of three to four times a week or more.

The second reason is you need to be hydrated. It still works if you’re not hydrated but not nearly as well. By hydrating, we mean consuming four 8-ounce glasses of water in the preceding 4 hours before treatment. It’s really not a lot of water and you should be drinking that much every day for general health anyway.

Another reason is it may not work is if you inadvertently turn the power level too low. The power level ranges from 1 to 10 and most people, 95% or so, will run it at the full power 10 unless your energy sensitive.

We’ve had a few customers where it didn’t work for them and after investigation found out they turned it down to zero or one or something very low.

So, make sure the power level is at 10 for most people.

One last common mistake is that you’re using the wrong protocol for your ailment. Which in most cases means you’re self-diagnosing because you’re the one that selects the protocol.

But sometimes what you selected is not really the core problem.

In circumstances like this, we highly recommend that you contact us so we can discuss your situation one-on-one, and make some recommendations on other things to try.

Yes, it’s OK to run several protocols in a day. But pay attention to your body and what it’s telling you. You can overdo it and it can make you tired because of it.

Because your body needs time to process the energy and repair itself. So just be keen to whether it’s making you too sluggish or tired and then cut back on the number of protocols or number of sessions in a day.

In general, we don’t recommend doing more than one or two sessions a day but everyone is different and we have customers doing it 7 to 8 times a day or more.

PEMF (Pulsed Electromagnetic Field) therapy is a non-invasive treatment that uses low-frequency electromagnetic waves to stimulate and heal cells in the body. It is known to be effective in reducing pain, inflammation, and improving blood circulation. However, it is not uncommon to feel tired after PEMF therapy. There are several reasons why this may happen: The body is undergoing healing: PEMF therapy stimulates the body’s natural healing processes, which can be physically demanding. As a result, your body may feel tired as it works to repair and regenerate damaged cells. Increased relaxation: PEMF therapy can also induce a deep state of relaxation, which can leave you feeling calm and sleepy. Dehydration: PEMF therapy may also cause dehydration, which can lead to fatigue. It is important to stay hydrated before and after treatment. Detoxification: PEMF therapy may also facilitate the release of toxins from the body. As these toxins are eliminated, you may experience fatigue as your body works to process and eliminate them. Overall, feeling tired after PEMF therapy is not necessarily a cause for concern. However, if you experience persistent or severe fatigue, it is important to consult with your healthcare provider to rule out any underlying health issues.

Yes. When a protocol is running the vibe should get warm up to 105 degrees Fahrenheit (40 degrees Celsius) which is perfectly normal. 105 Fahrenheit is what reasonably hot water would feel like on the inside of your wrist.

The device should get warm, about 105F (40C) which is normal, but not “very hot”. We have never seen one get much warmer than that.

It puts out energy, so it will get warm and some protocols have higher frequencies that are warmer but again it should not get higher than 105-110F.

It can depending on how you are you “wearing” it, with a lanyard around your neck, in your pocket ? If you have it your pocket with thick material/fabric pants of course it gets a little warmer without ventilation. Many women put it inside their bra against their skin, which we don’t recommend because it has no ventilation. It needs a little.

Is it too hot to touch ? If not than its likely normal. We have never seen a VIBE “over heat” but we have a temperature cut off system built in just in case, though it has never been activated in customer use or testing.

It’s hard to know exactly how warm it is getting if you don’t have an infrared thermometer to measure it…like some of us engineers do

But you can estimate 105 F by running water in the sink and adjusting the hot and cold so that it is very warm on your fingertip, but not too hot on the wrist.

Then touch your finger to the VIBE, they should feel about same temperature 105F

If so then that is completely normal.

So the best options if its too hot for you:

1 – “Wear” is so it gets better ventilation and don’t put it against our skin

2 – Turn the power level down to 7 or 8 (the + and – on the wheel), it will run much cooler with a 20% – 30% less field strength but that is still therapeutic for most people.

The magnetic field drops off very quickly, so the energy doesn’t transfer across a room or anything like that.

However, when it’s close to your body it’s resonating with the water in your body and the electrical conductivity of your body. Think of it like a pebble in a pond.

The energy is delivered where the device is at, but that pebble makes a wave that travels through the water in your body. That’s how it can be in your pocket and the energy still reaches your foot.

Plus the alternating magnetic wave makes an electrical current, a very slight one albeit, and the energy can travel throughout the entire body due to the electrical conductivity of skin, organs, etc.

You bought the VIBE for a reason. You were seeking relief from one or more ailments.

If you don’t get the relief you’re looking for, please contact us first to see if we can offer a solution. 90% of the time we can get you from “it just didn’t work for me” to “this device changed my life.” So please give us another chance to help you.

Email us at:

Call us at: (561) 701-8022

or send us a DM at our Instagram account and we will get right back to you to help.

https://www.instagram.com/bright_mind_and_body/

Magnetic therapy has been around for millennia

Lodestones, or natural magnets, have been used for centuries in many different cultures for a variety of purposes. The earliest known use of lodestones was in China around the 4th century BC. These naturally occurring magnets were used to create magnetic compasses that were used for navigation.

Over the next few centuries, lodestones were used by the Greeks, Romans, and Arabs. The Greek philosopher Plato even wrote about the healing powers of lodestones in his dialogue Timaeus. In the 1st century AD, Pliny the Elder wrote about how magnet therapy was used to treat headaches and gout.

More recent history

PEMF therapy has a long and rich history, dating back to the early 1900s. In the early days, PEMF therapy was used primarily for treating pain and injuries. However, it wasn’t until the 1950s that PEMF therapy began to be used for more serious medical conditions.

One of the earliest pioneers in PEMF therapy was Dr. Robert O. Becker. A renowned surgeon and researcher, Dr. Becker was one of the first to discover the healing potential of electrical stimulation. In his groundbreaking book “The Body Electric”, Dr. Becker detailed how he used electrical stimulation to successfully treat a wide variety of injuries and illnesses.

While electrical stimulation had been used for centuries to treat pain, it wasn’t until the work of Dr. Becker that its true healing potential was realized. His work laid the foundation for the development of modern PEMF therapy devices.

Since the early days of PEMF therapy, there have been many advances in technology and numerous clinical studies conducted on its efficacy. Today, PEMF therapy is commonly used to treat a wide range of conditions, including pain, inflammation, arthritis, osteoporosis, and even depression and anxiety.

The Earth’s heartbeat

PEMF is all around us and you are engulfed in it. If PEMF was harmful, we would all be dead.

The Schumann resonances are a set of global electromagnetic resonances, named after physicist Winfried Otto Schumann who predicted their existence in 1952. They are caused by lightning strikes in the atmosphere and were first observed experimentally in 1954.

The Schumann resonances occur because the space between the Earth’s surface and the ionosphere acts as a waveguide. The base frequency of the resonance is determined by the circumference of the Earth, and subsequent harmonics are spaced at integer multiples of this frequency. The resonant frequencies depend on the size and shape of the Earth, but are typically around 7.83 Hz, 14.3 Hz, and 20.8 Hz

The amplitudes of the Schumann resonances change depending on solar activity and other factors, but they are generally very stable over long periods of time. Because of this stability, they can be used to monitor changes in the Earth’s environment, such as volcanic eruptions or nuclear tests.

NIH Studies

Go to PubMed and search on “PEMF” you will find over 800 published studies

https://pubmed.ncbi.nlm.nih.gov/?term=pemf+

NASA and PEMF

Just Google “NASA PEMF Study” as see all of the research done there.

For further info and an exhaustive list of data, published papers, research, health references, European studies and so much more:

https://mimb.in/clinical-publication-list.html

https://resona.health/2023/10/01/liar-liar-pants-on-fire-where-is-the-data/

How does the Vibe compare to the Bemer or other PEMF mats? The short answer is that both PEMF devices are awesome in their own right. Many PEMF devices have helped millions of people worldwide.

Thanks to always advancing technology, the Vibe now offers a smaller, faster and more powerful and impactful delivery of what older, larger and more expensive devices once offered.

The Vibe is 25 times less expensive than the Bemer mat, for instance, 125 times smaller, 8 times stronger and 1 piece of equipment (as opposed to the Bemer's 7 pieces). The world's only pocket portable PEMF device.

Yes. Infused water is another delivery method for the Vibe frequencies. Water holds the frequencies extremely well, so when you drink it, your cells can absorb those energetic patterns gently and steadily throughout the day. It is similar to homeopathy, with small doses. Spread out the drinking of your infused water throughout the day, giving your body a steady benefit every few hours. Infusing water doesn't replace wearing the Vibe device, rather, it is supportive. On body sessions deliver the strongest, most targeted effect. Water is more subtle.

The way to infuse water or cream is to place the Vibe, face down, on a flat and stable surface, with the display screen facing down and the wave with the wholes facing up. Place your glass bottle of water or jar of cream on top of the wave with holes and run the protocol. Before you place the water on the Vibe, shake it to activate the water, then run the protocol See video below for more details.

The manufacturer of the Vibe offers a specially formulated cream that holds the protocol frequencies for 30 days, but you can also use your own face, hand or body cream.

resona.health

How to infuse the VIBE protocols into water and cream

In this short video below, we show you how to infuse the protocols into water or cream using the VIBE. View the entire video on this page.

How does the Vibe work?

Where are the Vibe instructions?

What are the cautions and warnings?

Where do the frequencies come from?

How can a small pocket device give full body coverage?

What kind of signal or wave does the Vibe put out?

How do I know it's working?

How does it compare to other energy devices?

Are there customs and duty fees for international shipments?

Does it really work?

What frequencies does the Vibe use?

How long is a protocol?

What is the Gauss level?

Can I pick my own frequencies?

Is it programable?

What do I run for prostate?

Can it cure cancer?

Can it destroy parasites?

What are the most common mistakes when using the Vibe?

What happens if I drop it in the toilet?

Is it ok to run several of the protocols in a day?

Why do I feel tired after PEMF therapy?

Does the Vibe need to touch skin?

Should the unit be set on level 10?

I have metal implants. Is it ok?

Can I use it with a pacemaker?

Is there an age restriction? Can I use it on my kids?

Does the Vibe make a sound?

How long do I run it for?

Is there a money back guarantee?

Does the Vibe have a warranty?

My device gets warm. Is that normal?

How far does it reach?

Can I use it if I am pregnant?

I want to return the Vibe. What can I do?

What research has been done?

How does the Vibe compare to the Bemer mat?

Can you infuse the protocol into water and cream?